| Element | Stainless Steel woven mesh |
| Size(s) | 5, 10, and 30 Micron |
| Pressure | 3000 psi (207 bar) |
| Port Size | 3/8” NPT, #6 SAE, 3/8 BSPP* |
| Weight | 1.34 kg (2.95 lbs)
*Consult Factory for Availability |
Accessories
F381 Filters
Keep your process protected from debris damage. Save a costly rebuild due to contamination. Filter your fluid with a Max replaceable filter. Install the filter housing and then replace the filter elements on a schedule right for your application. 5, 10, and 30 Micron filters available.
Specifications
MATERIALS OF CONSTRUCTION
|
Body
|
Stainless steel, type 303
|
|
Element
|
Stainless steel, type 304
|
|
O-Rings
|
Standard: Viton®
Optional: Teflon®, Perfluoroelastomer, Neoprene |
VARIANTS
|
F381
|
xxx
|
xxx
|
xxx
|
Std. Body (3000 psi)
|
|
|
Options
|
|||||
|
NPT
|
3/8” NPT ports
|
||||
|
SAE
|
#6 SAE ports
|
||||
|
BSP*
|
3/8 BSPP ports*
|
||||
|
5
|
5 Micron element
|
||||
|
10
|
10 Micron element
|
||||
|
30
|
30 Micron element
|
||||
|
VIT
|
Viton® O-Rings
|
||||
|
TEF
|
Teflon® O-Rings
|
||||
|
PER
|
Perfluoroelastomer O-Rings
|
||||
|
NEO
|
Neoprene O-Rings
|
||||
|
* Consult Factory for Availability
|
|||||
REPLACEMENT FILTER ELEMENT KITS
|
381-102-705
|
10 Micron replacement element with Viton® seals
|
|
381-102-715
|
10 Micron replacement element with Neoprene seals
|
|
381-102-725
|
10 Micron replacement element with Teflon® seals
|
|
381-103-705
|
5 Micron replacement element with Viton® seals
|
|
381-103-725
|
5 Micron replacement element with Teflon® seals
|
|
381-104-705
|
30 Micron replacement element with Viton® seals
|
|
381-104-725
|
30 Micron replacement element with Teflon® seals
|
Applications
-
Odorant Injection Measurement
Odorant Injection Measurement Telltale warnings can save lives. Safely using natural gas requires an effective odorization…
-
Aviation Hydraulic Testing
Testing of hydraulic fluid throughout an aircraft’s hydraulic pumps, motors, cylinders and actuators to operate wheel…
-
Hot Melt Adhesive Dispensing Applications Measured to a Fraction of a Gram
Quality and performance can change with a small amount of material in thermoplastic and reactive hotmelt…
-
Valve Leak Testing
Flow measurement is used during 100% certification of performance over a valve’s full range of criteria….
-
Chemical Additives Injection Measurement
Chemical additives injection is a broad description for a varied set of applications that require a…
-
Diesel Exhaust Fluid (AdBlue) Measurement
Diesel Exhaust Fluid (AdBlue®) System Flow Measurement. Selective Catalytic Reduction (SCR) revolves around the use of…
Downloads
| DOWNLOADS | MANUAL | PN SELECTOR | SPECIFICATION SHEETS | STEP FILES |
|---|---|---|---|---|
|
F381 Filters and Filter Elements
|
 |
|
|
Product Selection Matrix
