Measure low flows down to 1 cc/min for all your peroxide based curing and catalyst chemical needs.
Choose from frequency or analog transmitter options. Not for use in hazardous environments. Maximum temperature rating for all P234 transmitters is 90°C.
| Flow | 1 to 500 cc/min |
| Port Size | 1/4″ NPT or G 1/4-19 BSPP |
| Accuracy | (at 1 cP) ± 0.4% of reading over a 25:1 range |
| Pressure | 3000 psi (210 bar) maximum |
| K-Factor | 180 pulses/cc |
| Fluids | Water and most aqueous based chemicals and fluids in a pH range of 4 to 12, specifically suited for methyl ethyl ketone peroxide |
|
Filtration
|
10 Micron recommended
|
|
Weight
|
4.1 kg (9.0 lbs)
|
|
External
|
Stainless Steel, type 316, type 304; Blue Xylan 316 fasteners
|
|
Wetted
|
Stainless Steel, type 316, Graphite; PEEK; Expanite hardened 316SS
|
|
O-rings
|
Standard: Perfluoroelastomer
|
|
Signal Type
|
Output
|
Resolution (K-Factor)
|
Std. Temp†
|
High Temp†
|
Ultra Temp†
|
|---|---|---|---|---|---|
|
Frequency
|
5 VDC square wave (current sinking available)
|
180 pulses/cc
|
90°C
|
n/a
|
n/a
|
|
Frequency
|
5 VDC quadrature (2-phase)
|
90 pulses/cc/phase
|
90°C
|
n/a
|
n/a
|
|
Analog
|
0-10 VDC
|
Uni or Bi-directional
|
90°C
|
n/a
|
n/a
|
|
Analog
|
4-20 mA
|
Uni or Bi-directional
|
90°C
|
n/a
|
n/a
|
|
Compliance:
|
Not for use in hazardous environments. Adapting the meter to a conduit connection does not protect the system in a hazardous location. Do not use in a hazardous location as death or severe injury may occur.†Maximum temperature rating for all P234 transmitters is 90°C.
|
||||
Chemical additives injection is a broad description for a varied set of applications that require a…
| DOWNLOADS | MANUAL | ANALOG SPEC SHEET | FREQUENCY SPEC SHEET | PN SELECTOR | CALIBRATION EXAMPLE |
|---|---|---|---|---|---|
|
P234 Water Flow Meter
|
 |
|
|
|
|
